Tlačiť
Power versions:
HAKL SLIMv 122         6,5 l     1,2 kW     6 A     230 V
HAKL SLIMv 123     6,5 l     2,3 kW     10 A     230 V
HAKL SLIMv 136     6,5 l     3,6 kW     16 A     230 V

HAKL SLIMv

Electric storage water heater with thermostat and zero-pressure operation.

SVK MADE IN SLOVAKIA
i002 Pressure-free operation
termostaticke_spinanie Thermostatic switching
i010 Top installation
i013 Volume 6.5 l
Input 1.2, 2.3, 3.6 kW

CHARACTERISTICS OF GOODS

  • Installation on zero-pressure HAKL water taps
  • Zero-pressure operation at 0 bar with switching from 0.02 Mpa
  • Thermostatic switching with regulation from 5 °C to 75 °C
  • Manufactured in three output versions of the heater coil
  • Durable plastic tank
  • Installation above sink or basin
  • Servicing, emergency and frost-resistant thermal safety switch

HAKL SLIMv is manufactured in three output versions. The most powerful model heats water continuously with a reduced flow rate. The model with the lowest output is suitable for installation in electric grids with low circuit breaker setting. The required temperature of hot water can be set with a thermostat, which functions at the same time as a frost-resistant safety switch.

The additional indication “v” (SLIMv) means top installation. The connecting hoses are therefore on the bottom of the cover. This water heater is designed for installation on the zero-pressure above-sink HAKL water tap supplied with installation accessories (sealing, adapter, water heater holder…) The water heater in combination with a zero-pressure water tap can be installed on domestic water supply systems, public water supply, as well as gravity-fed systems with a water column greater than four meters.

TABLE OF TECHNICAL DATA

Model Switching type Max. water temperature Heating time from 10 °C to 50 °C Max. permanent water pressure Min. switching water pressure Ingress protection
HAKL SLIMv 112 thermostatic 75 – 80 oC 16 min. 0,0 MPa 0,02 MPa IP X4
HAKL SLIMv 123 thermostatic 75 – 80 oC 6,5 min. 0,0 MPa 0,02 MPa IP X4
HAKL SLIMv 136 thermostatic 75 – 80 oC 4 min. 0,0 MPa 0,02 MPa IP X4

SUITABLE APPLICATION TABLE

HAKL SLIMv 112 HAKL SLIMv 123 HAKL SLIMv 136
Input 1,2 kW 2,3 kW 3,6 kW
Wash basin ●● ●●● ●●●
Kitchen ●● ●●●
Shower
Bath
Number of consumption points 1 1 1

Key: ●●● three symbols indicate the maximum suitability of application