HAKL PL
Electric flow water heater, hydraulically operated with pressure-free mode
![]() |
MADE IN SLOVAKIA |
![]() |
Pressure-free mode |
![]() |
Hydraulic switching |
![]() |
Switching power NO |
![]() |
Level of protection IP 24 |
![]() |
Voltage 230 V |
CHARACTERISTICS OF GOODS
- installed to pressure-free faucets HAKL
- pressure-free mode 0 bar with a switch from 0.1 MPa
- hydraulic switching of microswitch
- wiring of 230V at 3.5 kW directly to the socket
- immediate and continuous water heating up to 43 °C
- one performance level of the heating coil
- mechanical protection against overheating of the coil
HAKL PL starts up automatically by turning the valve (tap) on the hot water faucet. The heater does not have a built-in reservoir, the water is heated instantly and continuously, and the electricity is consumed only when the hot water is released. Red light on the front cover signals when the heating is on. With its design and dimensions, it is intended to be installed only to a single location, such as on a kitchen washbasin, sink…
Installation is only possible to a special pressure-free water faucet HAKL. A wide range of faucets supplied with accessories (seals, adapters, heater holder…) provides for a simple, convenient and quick installation.
TABLE OF TECHNICAL DATA
Model | Power input | Current | Voltage | Wather press min. | Wather press max. | Protection class |
HAKL PL 135 | 3,5 kW | 16 A | 230 V | 0,09 MPa | 0,00 MPa | IP 24 |
HAKL PL 145 | 4,5 kW | 20 A | 230 V | 0,12 MPa | 0,00 MPa | IP 24 |
HAKL PL 155 | 5,5 kW | 25 A | 230 V | 0,15 MPa | 0,00 MPa | IP 24 |

Illustration PL:
Heater installation possibly only to pressure-free water faucet.
SUITABLE APPLICATION TABLE
HAKL PL 135 | HAKL PL 145 | HAKL PL 155 | |
Input | 3,5 kW | 4,5 kW | 5,5 kW |
Wash basin | ●● | ●●● | ●●● |
Kitchen | ● | ●● | ●●● |
Shower | ● | ●● | |
Bath | |||
Number of consumption points | 1 | 1 | 1 |
Key: ●●● three symbols indicate the maximum suitability of application