Electric flow water heater, hydraulically operated with pressure mode
|MADE IN SLOVAKIA|
|Switching power NO|
|Level of protection IP 24|
|Voltage 230 V|
CHARACTERISTICS OF GOODS
- installed to pressure-free and commonly available water faucets
- 6 bar pressure mode with switching from 0.1 MPa
- hydraulic switching of microswitch
- wiring of 230V at 3.5 kW directly to the socket
- immediate and continuous water heating up to 43 °C
- one performance level of the heating coil
- electrical protection against overheating of the coil
HAKL PL-T design and parameters were developed from the HAKL PM-B model series. Thanks to a reinforced joint and electronic control unit, the heater can also be installed in a water supply system to your custom faucet by the use of plumbing couplings (fittings).
With its design and dimensions, it is intended to be installed only to a single location.
Simple installation of the heater under the sink or basin can be done by screwing the bracket to a wall, which is by default fitted on the rear cover of the product. Protection unit using a thermal fuse significantly extends the life of the heating coil.
Other specifications are the same as for the HAKL PM-B model series.
TABLE OF TECHNICAL DATA
|Model||Power input||Current||Voltage||Wather press min.||Wather press max.||Protection class|
|HAKL PL-T 135||3,5 kW||16 A||230 V||0,09 MPa||0,6 MPa||IP 24|
|HAKL PL-T 145||4,5 kW||20 A||230 V||0,12 MPa||0,6 MPa||IP 24|
|HAKL PL-T 155||5,5 kW||25 A||230 V||0,15 MPa||0,6 MPa||IP 24|
Illustration HAKL PL-T:
Pressure connection of the heater to a common water faucet.
SUITABLE APPLICATION TABLE
|HAKL PL-T 135||HAKL PL-T 145||HAKL PL-T 155|
|Input||3,5 kW||4,5 kW||5,5 kW|
|Number of consumption points||1||1||2|
Key: ●●● three symbols indicate the maximum suitability of application