HAKL BDv
Electric storage water heater with vertical design.
![]() |
COMPLETED IN SLOVAKIA |
![]() |
Pressure operation |
![]() |
Thermostatic switching |
![]() |
Top installation |
![]() |
Volumes 150 l, 200 l |
![]() |
Input 2,0 kW |
CHARACTERISTICS OF GOODS
- Steel tank protected with double titanium enamel coating
- Tank with excellent thermal insulation
- Thermal circuit breaker preventing the heating coil from overheating
- Frost-resistant thermal safety switch to prevent water freezing in the storage tank
- Anode bar extending the useful life of the storage tank
- Internal thermostat with setting options and heating indicator
- Safety valve with a return flap included in the pack
- Console with variable width for heater installation
HAKL BDv electric water heaters are part of the product range of pressurised steel storage tanks. The long useful life of these storage tanks is ensured by the double layer of titanium enamel and the inbuilt anode bar. The additional indication “V” (BDv) means a cylindrical shape design in vertical pozition. The water temperature and heating regulation and connecting hoses are therefore on the bottom of the cover.
The heating coil output is designed to allow fast heating of the water in the storage tank without overloading the electrical grid. The thermal circuit breaker included in the standard design provides a higher degree of protection against coil overheating in critical situations. The required water temperature can be set using the thermostat screw located under the heater cover. The frost-resistant safety switch prevents water from freezing in the water heater and damaging the vessel. The thermostat with this setting does not switch on the heating coil at regular temperatures but protects the water heater from freezing if the ambient temperature declines significantly. A safety valve is delivered as standard with the HAKL BDv storage water heaters.
TABLE OF TECHNICAL DATA
Model | Insulation thickness | Max. water temperature | Heating time from 10 °C to 50 °C | Min. switching water pressure | Max. permanent water pressure. | Ingress protection |
HAKL BDv 150v | 3,8 cm | 75 – 80 oC | 4 hours 2 minutes | 0,02 MPa | 0,6 MPa | IP X4 |
HAKL BDv 200v | 3,8 cm | 75 – 80 oC | 5 hours 25 minutes | 0,02 MPa | 0,6 MPa | IP X4 |

- Double titanium enamel
- Thermal insulation 3.8cm
- Anode bar
- Heating coil 2000W
- Return thermal safety switch
- Frost-resistant safety switch
- Thermostat
- Sheet-metal flange with greater thickness
- Universal fastening system
SUITABLE APPLICATION TABLE
HAKL BD 150v | HAKL BD 200v | |
Volume | 150 l | 200 l |
Wash basin | ●●● | ●●● |
Kitchen | ●●● | ●●● |
Shower | ●●● | ●●● |
Bath | ●●● | ●●● |
Number of consumption points | 4 | 4 |
Key: ●●● three symbols indicate the maximum suitability of application